Checklist – Overhead Crane – Walker Zanger Forms

Location(Required)

Crane ID(Required)

Please enter a number from 1 to 1000.

Revised By (Name)(Required)

Check for loose objects, grease, and oil(Required)

Check guards(Required)

Visually inspect cabinets.(Required)

Visually Inspect resistor bank cabinet(Required)

Visually inspect collectors and conductors(Required)

Check lubrication, inspect for leaks(Required)

Check festoon cable and trolleys(Required)

Check brake shoes(Required)

Check for contaminants on rails(Required)

Check rope seated on drum and in sheaves(Required)

Operate crane controls with power off(Required)

Turn Power on to crane(Required)

Check all Motions(Required)

Visually inspect wire rope while raising/lowering(Required)

Locking Mechanism working properly(Required)

Cotter pins are in place?(Required)

Ensure all bolts, nuts, and other fasteners are tight and secure(Required)

The rubber pads free from coat of dust, debris and oil(Required)

Does the clamp turn in a 360 angle to be sure there is no stoppage?(Required)

Make sure the rubber tubes are in good shape(Required)

The springs are in good shape.(Required)

Notes

This field is for validation purposes and should be left unchanged.